You need to be careful during this process since you could very easily lock yourself out of the box and without physical access you won’t be able to do a hard reset. You might as well set up WEP while you’re at it since you’ve commited to being an ass. Reconnect to the router and give it a new SSID and admin password. Use the admin interface to change the default local IP to a different subnet like “192.168.2.1”.
The Phenoelit Crew maintains a huge list of default admin passwords. Connect to the router and go to the default IP address in you web browser, usually “192.168.1.1” or “192.168.0.1”. Linksys, D-Link, and Netgear make most consumer routers you’ll find so if you see an SSID of “linksys”, “default”, or “NETGEAR” it is most likely set to factory defaults. Follow the client mode HOW-TO over at Engadget.Īfter that you need to scan for a victim access point.
#How to hack wifi router upgrade
To start you need to upgrade the firmware on router B so you can use client mode.
The final component, router C, is plugged into router B and acts as a wireless access point. You have router B, a Linksys WRT54G that you will be putting into client mode and connecting to router A. This is important because it shows the victim isn’t technically savvy and won’t notice your intrusion. Your neighbor is in possession of router A. It here as a silly geek trick and will probably just annoy you every time your connection goes down because you’re too cheap to pay for a good wired connection. You can use this to hang your wired network off of someone else’s wireless router and serve their wireless connection back to them. This how-to gives the steps needed to put together a simple man-in-the-middle wireless repeater.
0 kommentar(er)
